Do you know the waterproof grade standard of waterproof power supply?

Waterproof power supply, as the name suggests, is a power supply that can be waterproof. The waterproof power supply protection level is referred to as IP(International Protection). For classification dust, foreign body intrusion, waterproof and moisture-proof properties.

Its most important feature is waterproof, can be used outdoors, without fear of rain, fog, direct sunlight and other harsh environment.

Mainly for LED spotlights, LED light strips, LED street lights, LED light bulbs, LED buried lights, LED ceiling lights, LED flat lights, LED wall washing lights and other LED lamps to provide driving mode.

According to the driving mode can be divided into two categories: constant flow and voltage regulation.

So what is the waterproof grade standard of waterproof power supply?

Waterproof grade standard of waterproof power supply:

IPX_ :Waterproof level.

IPX0:No special protection.

IPX1:Vertically falling water droplets (such as condensate) will not cause damage to electrical appliances.

IPX2:The tilt Angle of the device is within 15 degrees of the general position to avoid water droplets entering.

IPX3:Prevent rain or water sprayed in the direction of vertical Angle less than 60 degrees from invading electrical appliances and causing damage.

IPX4:Prevents water from splashing in all directions from invading electrical appliances and causing damage.

IPX5:Can resist the water column of low pressure spray gun for at least 3 minutes.

IPX6:Can resist the water column of high pressure spray gun for at least 3 minutes.

IPX7:Resists soaking in water up to 1 meter deep for 30 minutes.

IPX8:Can resist continuous immersion in water more than 1 meter deep, but the standard for this grade will fluctuate.

Under normal circumstances, the waterproof power supply can meet the general needs with IP65 grade, but the specific waterproof grade needs to be comprehensively considered according to the use.